Circuit Atlas · HUSH M4 · Rev 2027.4 draft
4 Signal flow
The order of stages in each strip and in the master path.
IN DEVELOPMENT · REV 2027.4 (DRAFT) · DESIGN TARGETS, NOT MEASUREMENTS
HUSH M4 is in development. This draft is published on zakkhutoretsky.com; it has no price and no ordering. Figures marked design target are goals for the finished product. Figures marked calculated come from the published formulas. No value on these pages was measured on a built unit. Interviews are cited as the design brief, not as an endorsement.
See this control Signal path at a glance
4 Signal flow
Each of the four strips runs input select, trim, four-band EQ, filter and fader, in that order, with a pre-fader cue tap. The strips sum into the master bus; the master isolator and the (switchable) FX loop follow, then the master fader and the balanced output drivers. The cue bus and headphone amplifier sit beside the master path. A single linear supply feeds everything. The whole path is analogue.